UV sterilization machine program

1,Regular inspection to ensure the normal operation of the UV lamp

2,UV lamp should be replaced after 8000 hours of continuous use or one year. When replacing a new lamp, first unplug the lamp power socket and take out the UV lamp. Be careful not to touch the quartz glass of the new tube with your fingers, because the stain will affect the intensity of the light, and carefully put the tube into the lumen of the sterilizer.

1, Work area tunnel outer body: high quality 304 yarn surface stainless steel

2, Work area tunnel cavity: mirror stainless steel Model: #304

3, Body support frame: Fangtong Steel set Model: 2′′ Fangtong

4, Air transport system: one set of forced air combination blower (extracting harmful gas) Model: 6 inch

5, Insulation material: vacuum aluminum silicate + silk double layer Model: 60K

6, Conveyor belt: Teflon mesh belt 1. Main switch: 20A

7, Transport motor: 800W (inverter speed regulation)

8, Governor: 50W (electronic stepless frequency converter speed digital display speed operation)

9, Exhaust fan: CY-125

10, Ammeter : 50A set

11, Voltmeter: 220V set

12, Working voltage :20V (±10) three-wire system 50Hz

13, UV light source effective light moment: 150mm

14, Lamp length: 600mm

15, UV ultraviolet germicidal lamp 16 * 20W UV lamp in the longitudinal direction of the lumen, upper, lower, left and right installation wavelength 253.7nm, 1 meter distance intensity is 160 microwatts / square centimeter or more. The service life is more than 8000 hours.

1, Power supply: AC220V  1.3KW 50Hz

※Voltage allowable range: ±5% of rated value

※(The range that can be operated is ±10%)

2, Maximum current: 50A

3, When placing the cabinet, be careful that the distance to the wall should be greater than 100 mm.

● Temperature overheat preventer (protecting the test object and test chamber)

●  Fault alarm prompt

● Overvoltage and overcurrent protection

● Equipment overload protection

http://ja.china-packing-machine.com/